Sealey CPS02 Instructions For Use page 3

4.3. Fit Cover (Roof and Sides)
4.3.1. Pull the cover over the roof frame, make sure the cover fits properly at the eaves and at the edge of the roof.
fig.3
4.4. Fit Legs and Cross Braces
4.4.1. Ensure that there are enough people to lift the weight of the roof and cover.
4.4.2. Lift the roof and cover high enough to insert the legs first down one side, then repeat for the other.
4.4.3. Pass the cross braces through the sleeves then refer to figs. 4 and 5 for the assembly of the middle leg brackets and figs. 6 and 7 and for
the assembly of the end leg brackets.
fig.4
fig.6
4.5. Fix Cover and Fit Ends
4.5.1. Fix the cover to the frame by closing the velcro strips round the poles. Then fit the
toggles through the eyelets and round the frame, see fig.8.
4.5.2. Use a ladder to fit the ends using toggles.
© Jack Sealey Limited
fig.5
fig.7
Original Language Version
fig.8
CPS02 Issue: 1 - 19/12/14