Related Manuals for Samsung Galaxy J5 SM-J510FN
Summary of Contents for Samsung Galaxy J5 SM-J510FN
- Page 1 New Product SVC Guide [ SM-J510FN ] Rev 2.7 Instructor : jewon park (jewon7.park@samsung.com) - This document cannot be used without Samsung’s Authorization - Confidential...
- Page 2 Samsung reserves the right to make changes to this guide and the product described herein, at anytime, without obligation on Samsung Electronics to provide notification of such change.
- Page 3 1. Specification of SM-J510FN (Galaxy J5 LTE) 2. H/W 2-1. Disassembly & Assembly 2-2. Troubleshooting 2-3. R/F Calibration 3. S/W 3-1. S/W Download 3-2. Key Features 4. SVC Technical Information - This document cannot be used without Samsung’s Authorization -...
- Page 4 Bluetooth 4.1, WIFI b/g/n, NFC, USB2.0 Battery & GPS 3,100mAh A-GPS & GLONASS Micro SD & OS Up to 128GB Android V6.0 (MM) Remarks New Pocket Type : - Water Resistance : - - This document cannot be used without Samsung’s Authorization -...
- Page 5 Disassembly & Reassembly - This document cannot be used without Samsung’s Authorization -...
- Page 6 Disassembly & Reassembly Important management points - This document cannot be used without Samsung’s Authorization -...
- Page 7 Diversity ANT Diversity ANT BT/WIFI ANT ANT contact contact 13M CAM BT/WIFI ANT contact FLASH LED SPEAKER POWER KEY VOLUME KEY SIM 1 SIM 2 TFLASH MAIN ANT contact MAIN ANT - This document cannot be used without Samsung’s Authorization -...
- Page 8 Parts Layout PBA (Top side) - This document cannot be used without Samsung’s Authorization -...
- Page 9 Parts Layout PBA (Bottom side) - This document cannot be used without Samsung’s Authorization -...
- Page 10 Check the voltage of C4035(=PMIC Output) If not the correct value Replace the U4001 ** Usage guide of the Power & Current test jig has been uploaded at GSPN. (Power & Current Tester_Rev4_141226.pdf) - This document cannot be used without Samsung’s Authorization -...
- Page 11 Main chip (UCP3000-1) Check the frequency of OSC4000 If not the correct value X-TAL (OSC4000) Step7 Step6 OSC4000 =19.2Mhz Step5 L4009 = 5V U4003 U4001 C4035 =2.1V Step5 L4012 = 5.0V - This document cannot be used without Samsung’s Authorization -...
- Page 12 Check the voltage of C4052(eMMC) If not the correct value Replace the eMCP(eMMC) ** Usage guide of the Power & Current test jig has been uploaded at GSPN. (Power & Current Tester_Rev4_141226.pdf) - This document cannot be used without Samsung’s Authorization -...
- Page 13 Troubleshooting Power on but no operation (freezing) Step 7 UME4000: EMCP(emmc) C4052=1.8V - This document cannot be used without Samsung’s Authorization -...
- Page 14 Check the voltage of L4009 If not the correct value Replace the L4009, L4012 ** Usage guide of the Power & Current test jig has been uploaded at GSPN. (Power & Current Tester_Rev4_141226.pdf) - This document cannot be used without Samsung’s Authorization -...
- Page 15 Troubleshooting No Charging Step 6 Step 7 C4086 = 5V L4009 = 5V U4003 Step7 L4012 = 5.0V - This document cannot be used without Samsung’s Authorization -...
- Page 16 TXMODULE, TRANSCEIVER, LFEM, FILTER(F1009: B3, DCS) FILTERs FILTER(F1004: B40) FILTER(F1006: B7) TXMODULE, TRANSCEIVER, LFEM, FILTER(F1008: B2, PCS) FILTERs FILTER(F1002: B5, GSM850) FILTER(F1001: B8, GSM900) TXMODULE, TRANSCEIVER, LFEM, FILTER(F1000: B20) FILTERs - This document cannot be used without Samsung’s Authorization -...
- Page 17 Troubleshooting Call Problem U1103 (Transceiver) Step5 PAM1000 U1007 (LFEM) U1001 (LB PAM) TXM1000 F1008, F1009 F1007, F1006 F1002, F1001 F1000 - This document cannot be used without Samsung’s Authorization -...
- Page 18 Check the status visually(crack, missing, Abnormal RF components. Corrosion..etc) of RF components. (compare to normal PBA) TRANSCEIVER(U1103) CP(Call Processor) TXMODULE(TXM1000) Normal (UCP3000-1) LB PAM(U1001) CP PMIC(U4001) MB/HB PAM(PAM1000) APT MODULATOR(U1004) - This document cannot be used without Samsung’s Authorization -...
- Page 19 Step2,3 Step4 CHECK SETTINGS Main ANT. Contact (for main RF) ANTENNA contact Step5 DEBUG SCREEN STATUS Same value compare to normal device. Step4 Diversity U1004 ANTENNA contact (APT MODUL ATOR) - This document cannot be used without Samsung’s Authorization -...
- Page 20 Not solved Go to step 3 Solved PMIC Check if the SPK is contacted to PBA well, and If yes, replace the PMIC. Not solved Go to step 3 - This document cannot be used without Samsung’s Authorization -...
- Page 21 Troubleshooting Sound Problem Step3 Step6 Assy PBA Assy case-rear Speaker contacts Speaker Step7 U4001 PMIC - This document cannot be used without Samsung’s Authorization -...
- Page 22 If not the correct value (C6051,C6052,C6050) C6041 = +7.6V OLED DC DC (U6000) Notice. It should be measured when the display C6043 = 4.6V is activated on C6042 = -4.0V - This document cannot be used without Samsung’s Authorization -...
- Page 23 Troubleshooting Display Problem Step2 LCD CONNECTOR: HDC6002 Step5 U5006 (VDD_LCD_3P0) Step7 OLED DC DC HDC6002 (U6000) C6042 C6043 C6041 Step6 U6004 (VDD_LCD_1P8) - This document cannot be used without Samsung’s Authorization -...
- Page 24 RF Calibration Preparation Item Quantity Code RF cable GH81-11962G (Instrument to divider) Anyway JIG Power Supply E3632A RF Equipment CMW500 GH81 – 10952A IF cable Connection Diagram Anyway PHONE - This document cannot be used without Samsung’s Authorization -...
- Page 25 2. Select each 4 S/W files. (BL,AP,CP,CSC) 3. Press the start button in the Odin. 4. Automatically reboot the phone when the downloading is completed. Hard reset : press Volume Down+Power key during 7 sec. - This document cannot be used without Samsung’s Authorization -...
- Page 26 Ultra Power Saving Mode changes your screen to black and white and shuts down all unnecessary features to dramatically minimize battery consumption. Entering Path : Settings → Battery → Ultra power saving mode - This document cannot be used without Samsung’s Authorization -...
- Page 27 Key Features Camera Smarter ‘Selfie’ Functions Wide Selfie Normal Selfie Entering Path : CAMERA - This document cannot be used without Samsung’s Authorization -...
- Page 28 Key Features Downloadable Themes Home Screen, Lock Screen and preinstalled applications can be customized with downloadable themes. - This document cannot be used without Samsung’s Authorization -...
- Page 29 Key Features Downloadable Themes To change theme, long press empty space on the Home Screen and tap “Themes”. More themes can be downloaded from Theme Store. - This document cannot be used without Samsung’s Authorization -...
- Page 30 Supports importing data from either Android or iOS devices. After user set up Zero device for the first time, he receive notification suggesting to install Smart Switch to initiate data transfer - This document cannot be used without Samsung’s Authorization -...
- Page 31 Key Features Smart Switch - This document cannot be used without Samsung’s Authorization -...
- Page 32 Smart Switch 1. Install Smart Switch on sending device. 2. Press “SEND” on sending device and “RECEIVE” on receiving device. The devices would pair through audio signal and initiate data transfer. - This document cannot be used without Samsung’s Authorization -...
- Page 33 GH81-12712E OCTA Disass’y Jig Upper GH81-12833A OCTA Disass’y Holder GH81-12119A Double Sided Tape GH81-12126A Glass Absorber GH81-11902A Pressing JIG Body GH81-11903A TSP tape Attaching JIG GH81-11905A Pressing Pad(for OCTA) GH81-13537P - This document cannot be used without Samsung’s Authorization -...
- Page 34 No part of this guide may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of Samsung Electronics.