General Measurements - Mindray DC-80 Operator's Manual

8.2

General Measurements

8.2.1 2D General Measurements
2D general measurements refer to general measurements on images of B, Color, Power, or iScape
imaging modes. The measurements listed below can be performed:
Measurement
Tools
Distance(mm)
Depth
Angle
Area (Ellipse,
Trace, Cross,
Spline)
Volume (Ellipse),
Volume (Ellipse
distance)
Double dist
Parallel Line
Trace length,
Spline length
Distance Ratio
Area Ratio
B histogram
B profile
Color Velocity
Volume Flow
Strain Ratio
Elasto ratio
Strain-Hist
Elasto-Hist
IMT
8.2.2 M General Measurements
M general measurements refer to general measurements on M-mode, CM-mode, AM-mode
images. The measurements listed below can be performed:
8-2 Measurement
Description
Measures the distance between two points on the image.
The distance between transducer surface and the probing point along
ultrasound beam.
The angle between two intersected planes.
Measures the area and perimeter of a closed region.
The volume of a target.
Measures the length of two line segments perpendicular to each other.
Measures the distance between every two line segments of five parallel line
segments, namely, four distances in total.
Measures the length of a curve on the image.
Measures the lengths of any two line segments and the calculated ratio.
The areas of any two regions and the calculated ratio.
Measures and counts the gray distribution of ultrasonic echo signals within a
closed region.
Measures the gray distribution of ultrasonic echo signals on a line.
Color flow velocity (only valid for Color mode).
Measures blood flow through some vascular cross section per unit time.
Measures the strain ratio.
Measure the elastography ratio
Display the strain value of the ROI in a histogram.
Display the elasto value of the ROI in a histogram
Measure intima-media thickness