Fdd Troubleshooting; Procedure 1 Fdd Head Cleaning Check; Procedure 2 Diagnostic Test Program Execution Check; Procedure 1 - Toshiba TECRA 9100 Series Maintenance Manual

2 Troubleshooting Procedures
2.5

FDD Troubleshooting

This section describes how to determine if the FDD is functioning properly. Perform the
steps below starting with Procedure 1 and continuing with the other procedures as required.
Procedure 1: FDD Head Cleaning Check
Procedure 2: Diagnostic Test Program Execution Check
Procedure 3: Connector Check and Replacement Check

Procedure 1

FDD Head Cleaning Check
FDD head cleaning operation details are given in Chapter 3, Tests and Diagnostics.
Insert the Diagnostics Disk in the computer's floppy disk drive, turn on the computer and run
the test. Clean the FDD heads using the cleaning kit. If the FDD still does not function
properly after cleaning, go to Procedure 2.
If the test program cannot be executed, go to Procedure 3.
2-28

2.5 FDD Troubleshooting

TECRA 9100 Maintenance Manual (960-347)