Chapter 9 Replacing Gsn Parts; Replacing Electrodes (Gsn 200); Electrode-Replacement Kit - Geodesic Sensor Net Technical Manual

chapter 9
R
EPLACING
9
CHAPTER
GSN P
I
ncluded with each Net are a number of replacement kits. Additional kits are
available from EGI.
The GSN 200 comes with five electrode-replacement kits, and the HCGSN is provided
with 10 replacement sponges. These are the only parts that can be serviced by the user;
all other repairs must be performed by EGI. For instructions on replacing sponges, see
page 97.

Replacing Electrodes (GSN 200)

Each electrode-replacement kit contains a new electrode consisting of a unitized
sponge, electrode pellet, lead wire, and integral Hypertronics contact. The kit
(Figure 9-1) does not contain a pedestal because the replacement process uses the
existing pedestal of the sensor that is receiving the new electrode.
Geodesic Sensor Net Technical Manual
ARTS
Figure 9-1. Electrode-replacement kit
S-MAN-200-GSNR-001 • January 31, 2007
89