Repair; Recycling And Disposal Of Nets - Geodesic Sensor Net Technical Manual

3: GSN 200

Repair

Electrode Replacement
Field replacement of electrodes in the GSN 200 is described in Chapter 9, "Replacing
GSN Parts."
Other Repairs
Repairs other than electrode replacement for the GSN 200 must be performed by a
trained Net technician and will require the Net to be returned to EGI for servicing (see
Appendix A, "Technical Support"). Please disinfect the Net (see page 81) before
returning it to EGI.
Avoid Tangling
When unpacking, storing, soaking, rinsing, or
disinfecting the GSN 200, take care that it does
not become tangled. Specifically, do not permit
the connector or the sensor array to pass through
the wires of the sensor lead bundle (Figure 3-11).
Figure 3-11. Avoid passing
connector or sensor end of GSN 200
through lead bundle

Recycling and Disposal of Nets

See "Component Recycling and Disposal" on page 56.
46
Geodesic Sensor Net Technical Manual
S-MAN-200-GSNR-001 • January 31, 2007