Bissell ProHeat 2X Revolution Pet Pro Quick Start Manual

Carpet cleaner brush is not turning, support

Hide thumbs Also See for ProHeat 2X Revolution Pet Pro:

Table of Contents

Download this manual

My ProHeat 2X® Revolution® Pet Pro Carpet Cleaner

brush is not turning | Support

Unplug the machine before continuing

•

Check for obstructions in the brush area - clothing, rug, string, etc.

•

•

While the machine is upright, unplug the machine and remove both tanks

•

Remove the nozzle and brush chamber cover

•

Press the recline pedal and lay the machine on its back

•

Use a flathead screwdriver and press it into the slot at the back and then front of the belt access

door

Lift to remove the belt access door

Table of Contents

Do you have a question about the ProHeat 2X Revolution Pet Pro and is the answer not in the manual?

Page 1 My ProHeat 2X® Revolution® Pet Pro Carpet Cleaner brush is not turning | Support Unplug the machine before continuing • Check for obstructions in the brush area - clothing, rug, string, etc. • Remove any obstructions • While the machine is upright, unplug the machine and remove both tanks •...
Page 2 • Then, remove the wheel by the belts • Turn the machine on its side and use a Philips screwdriver to remove the screw just underneath the wheel • Slide the wheel down to remove • Lay the machine back down on its back •...
Page 3 • Align brush rolls with belt at other end • To ensure alignment, hold the end of one brush roll and twist • The other brush roll rotates with it • Check that washers are in place • Reassemble the belt and end cap, securing with screws you removed •...
Page 4 • Snap the belt access door back down into place • Replace the brush cover and front nozzle to test If brushes still won't turn contact us •...