Antenna Coaxial Cables; Removing The Antenna Coaxial Cables - Toshiba Satellite 1400 Series Maintenance Manual

4.26 Antenna Coaxial Cables

4.26 Antenna Coaxial Cables

Removing the Antenna Coaxial Cables

To remove the antenna coaxial cables, follow the steps below and refer to figures 4-62 to 4-
63.
NOTE: When you open or close the top cover, hold it by the sides close to the hinges to
prevent damage.
1. Remove two M2.5×6 tapping screws securing the metal plate.
2. Remove the metal plate and the plastic brace.
3. Slip tweezers into the side of the plastic brace and pry to release two latches and
remove the bottom part of the plastic brace.
Figure 4-62 Remove two silver screws securing the metal brace
Satellite 1400/2400 Maintenance Manual (960-364/365)
4 Replacement Procedures
M2.5×6 tapping screws
Metal plate
Prastic brace
4-89