4 Replacement Procedures
Removing the Battery Pack
To remove the battery pack, follow the steps below and refer to figures 4-1and 4-2.
CAUTION: When handling battery packs, be careful not to short circuit the terminals.
Also do not drop, hit or otherwise apply impact; do not scratch or break the casing and
do not twist or bend the battery pack.
1. Turn the computer upside down.
2. Slide the battery latch to the left to release it, then pull the battery cover slightly
forward and lift it out.
4-8
Figure 4-1 Releasing the battery cover
Satellite 1400/2400 Maintenance Manual (960-364/365)
Battery cover
Battery latch
4.1 General