During Execution - Pioneer CJ-V55 Service Manual

HOW TO USE SERVICE MODE
The light up for the first two digits.
Input the value for the function mode (an upper digit or an
upper and lower digit) with the number keys.
(Example) [
5
]
When the BEST HITS key is pressed, 'beep'- will sound and
changes to execution mode.
When number(s) not existing in the function mode are input,
'beep-beep'* will sound and it reverses to the previous
display. Input correct numberfs).
4. During execution
(1) SELECTION REMAINING Indicator
Alternately displays the submode (c2) and the function mode
(20) for approximately once a second each.
If an upper digit is specified for the function mode value, a
small "0" will be displayed for the lower digit.
(Example)
(2) YOUR SELECTION/NOW PLAYING indicator
• Submode 0
Up to 999,999 will be displayed.
The number will be displayed completely if the value is smalier-
than-or-equal-to 9,999.
If the number is greater-than-or-equal-to 10,000, the first two
digits and the remaining four digits will be displayed
alternately.
(Example) Displaying 123,456:
(Displays periods and the first two digits.)
(Displays the remaining four digits.)
(Function mode 00 to 09]
Displays the song number and the number of times of playback
alternately.
(Example) Playback of track No. 1207 for 57 times:
| j pjj 71 (Displays the track No. with periods.)
! ^ 71 (Number of times of playback)
[Function mode 10 to 19, 20 to 29]
Displays the disc number and the number of times as in the
function mode 00 to 09. The disc number is displayed in the
upper two digits, and the lower two digits are set to "00".
[Function mode 30 to 39]
Displays the 4-digit error codes.
LUE
l
13956:
[Function mode 50 to 53]
The ID number is displayed in 3-digit, 3-digit, 2-digit and 3-digit
numbers.
[Function mode 6]
Displays the version of the built-in microprocessor.
iU <-~u'
• Submode 2
[Function mode 0 or 11
Displays a number up to two digits with periods.
(Example) When "04' is input:
When the BEST HITS key is pressed, "beep" will sound, and it
changes to function mode 1 (from 0) or to 20 (from 1).
[Function mode 20 to 29 (max. 99)]
Five types of bonus rates can be set. Set the value of credit
where the bonus applies in the function modes 20, 22, 24, 26 or
28, and the corresponding number of bonuses in the function
modes 21, 23, 25, 27 or 29.
(Example) Setting credit 8 and bonus 1 to the function modes 20
and 21:
• Function mode 20 ...._,
ngr 7i
Displayed with blinking upper two digits.
• When the BEST HITS key is pressed, "beep" will sound and
it changes to the function mode 21.
• Function mode 21
I
Displayed with blinking lower two digits.
• When the BEST HITS key is pressed, "beep" sound is output
and changes to the function mode 22.
(Example of bonus rate setting)
Function
mode _._ _
20 8 1
22 20 2
24 32 3
26 0 0
28 0 0
Function
mode
21
23
25
27
29
An identical credit value cannot be specified in the same setting.
For example, when the bonus rate has been set as in the above
table and credit value 20 is input to function mode 20, "beep-
beep-beep" warning will sound and the credit value of the
function mode 21 will change to 2, because the same value
exists in the function mode 22. The credit values of function
mode 24 and 25 wili change to those of function modes 22 and
23.
(Example) Search in the lowest disc of the third CD player fails
due to exceeding the time limit.
I
.'96
Likewise, if credit value 8 is input to function mode 22, "beep-
beep-beep" warning will sound and the function mode wili
change to 21, because the same value exists in the function
mode 20, The credit values of function mode 24 and 25 will
change to those of function modes 22 and 23.
< DRA1107 >