Cautions Regarding Handling Of Magazines - Pioneer CJ-V55 Service Manual

INSTALLING DISCS TO THE MAGAZINES
(D Push the disc tray back in.
® Insert other discs by repeating steps © to
NOTE:
• Please make sure to only pull out one disc tray at a time.
(When a disc tray has been pulled out, do not pull out other
disc trays.)
• if discs are inserted label side upward, it will not be possible tor
them to be played. Please make sure to insert them with the
label side downward.
• Objects other than discs (song cards, explanations of disc
contents, etc.), must never be inserted into the disc trays.
• Do not touch the playing surface of discs (the iridescent side)
with hands or fingers.
© Insert the magazine into the appropriate magazine insertion
slot of the CD piayer until it clicks.
©Insert the magazines into other magazine insertion slots by
repeating step © to ©.
IMPORTANT
Make sure to insert all three magazines into the three
magazine insertion slots of the CD player.
Otherwise, the CD player will not operate.
Insert an empty magazine if no discs are required.
CAUTIONS REGARDING HANDLING OF
MAGAZINES
• When inserting b magazine into the player, make sure that the
direction of insertion is correct.
• After use, store in the case provided. Do not place in locations
subjected to high temperatures or exposed to direct sunlight.
• Do not take magazines apart.
• Be careful not to drop or hit magazines against things. Also, do
not apply strong force to trays which have been withdrawn.
• Application of benzene, thinner, insecticide or other volatile
liquids to a magazine may damage the surface, so keep
magazines away from such substances.
CAUTION
This magazine is for use with the CD JUKEBOX and, because
of the wear which naturally occurs, should be replaced at 6
monthly intervals.
The 6 monthly interval is a rule of thumb. The real
replacement interval depends on the frequency of use and the
circumstances. The ball bearing becomes worn after the
same tray has been used for play 5,000 — 8,000 times.
Using the worn ball bearing increases the load to the
mechanism, resulting in damage on the drive motor or other
parts. Early replacement is therefore recommended.
11
<DRA1107>