Advertisement
Produktgruppe 19
16 von 16
A Adjust the drawer panel as needed: See Fig. 4.
A Remove the retaining screw.
A Adjust the panel using the adjustment screw.
A Re-install the retaining screw.
A Remove the drawer panel as needed: See Fig. 5.
A Press down on the retainers to release the drawer panel.
A Secure the drawer panel as needed: Insert the drawer panel and lock it in place from top to bottom.
Danger!
Risk of electric shock, appliance damage when disassembling:
When the WTV is disassembled, the washer lid is not adequately sealed, due to the residual holes. The washer can no
longer be operated safely.
Before the washer can be operated again without the WTV, the lid must be sealed in one of the following ways:
Seal the holes in the lid using silicone, or
Install a new lid on the washer. (Lids are available through Miele dealers.)
Risk of electric shock when lid is removed:
Removing/installing the lid may only be done by a trained technician in strict accordance with national, state and local
codes.
Before starting any service work, disconnect the appliance from its power source.
am
26.02.2014
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Umbau- und Montageanweisung
M.-Nr. 06958933
Advertisement
