JRC JCY-1900 Instruction Manual page 131

Error Error
code type
000 WARNING
001 WARNING
002 CAUTION
003 CAUTION
004 WARNING
005
006 WARNING
007 CAUTION
008 WARNING
Alert indication
VDR operation failure
Recording stop
Blackout
Battery low voltage
Fan* failure in RCU
*: 1, 2
Battery failure
Battery high
temperature
Battery high charging
voltage
Chapter 6 Maintenance and Inspection
Alert contents
The RCU can't
communicate the OPU.
The data recording is
stopping.
The AC input power is
not supplied to the
RCU.
The voltage of RCU's
built-in battery is lower
than the rated value.
The RCU's built-in fan
is stopping.
The RCU's built-in
battery is deteriorating.
The temperature of
RCU's built-in battery is
higher than the rated
value.
The charge voltage of
RCU's built-in battery is
higher than the rated
value.
Actions to take
1) Check the cable.
2) Reboot the RCU.
When the data recording stopped to
prevent overwriting data, this
Follow the
message is displayed.
directions of the relevant
authorities as to whether to
restart the data recording.
About restarting the data
recording, see "4.8.4 Stopping
the recording or restarting the
recording".
1) Check the switchboard.
2) Check the POWER switch. Turn
on the POWER switch.
3) Check the AC line fuse in the
RCU. If the AC line fuse blown,
replace the fuse.
Check the RCU's built-in battery.
Turn on the POWER switch and
charge the battery.
It is necessary to replace the fan.
Please contact our head office, or a
nearby branch or local office to
request servicing.
It is necessary to replace the battery.
Please contact our head office, or a
nearby branch or local office to
request servicing.
1) Check the temperature of place
where the RCU installed.
2) Reboot the RCU and check it
works normally. If there is still a
problem, please contact our head
office, or a nearby branch or local
office to request servicing.
Reboot the RCU and check it works
normally. If there is still a problem,
please contact our head office, or a
nearby branch or local office to
request servicing.
95