Package Contents; Electrical Safety - DeWalt D28065 Instruction Manual

ENGLIS H

Package contents

The package contains:
1 Angle grinder
1 Guard
1 Anti vibration side handle
1 Flange set
1 Two-pin spanner
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
The D28065 heavy-duty angle grinder is designed
for professional grinding at various work sites
(i.e., construction sites). DO NOT use under wet
conditions or in presence of flammable liquids
or gases.
These heavy-duty angle grinders are professional
power tools. DO NOT let children come into
contact with the tool. Supervision is required when
inexperienced operators use this tool.
a. Trigger switch
b. Lock-on button
c. Lock-off button
d. Spindle lock button
e. Guard
f. Dust Ejection System™
g. Side handle
h. Side handle hole
i. Threaded clamp nut
j. Backing flange

Electrical safety

Your D WALT tool is double insulated in
E
accordance with EN 50144; therefore no
earth wire is required.
26
WARNING: 15 V units have to be
operated via a fail-safe isolating
transformer with an earth screen
between the primary and secondary
winding.
Mains plug replacement
(U.K. & Ireland only)
DANGER:
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorised
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live
(L) (2) and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminals crews.
4
3
WARNING: NEVER use a light socket.
NEVER connect the live (L) or
neutral (N) wires to the earth
pin marked E or
Using an extension cable
If an extension cable is required, use an approved
extension cable suitable for the power input of this
tool (see technical data).
1
2
.