Technical Data; Defi Nitions: Safety Guidelines; General Power Tool Safety Warnings - DeWalt DE7025 Original Instructions Manual

MITRE SAW MOUNTING BRACKETS
DE7025, DE7030
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical Data

Length mm
Height mm
Maximum working load kg
Weight kg
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.

General Power Tool Safety Warnings

DE7025 DE7030
430 550
75 75
113 30.5
0.9 1.0
General Safety Instructions for Stand
Accessories
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
WARNING: For your own safety, read
the mitre saw stand instruction manual
before using any accessory. Failure
to heed these warnings may result in
personal injury and serious damage to
the mitre saw stand and the accessory.
When servicing this tool, use only
identical replacement parts.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING: To reduce the risk of
personal injury:
• ALWAYS use eye protection. All
users and bystanders must wear eye
protection.
• ALWAYS check the stability of the mitre
saw stand and the mitre saw attached
to it before putting the stand or the saw
into use.
• DO NOT mount any power tool other
than a mitre saw to this stand. Mounting
other power tools to this stand could
result in severe personal injury.
• DO NOT exceed the weight these
brackets can hold. Each bracket can
support up to 250 lbs (113 kg) when
loaded directly over the stand main
beam. Do not exceed weight rating of
the stand.
• Follow the mounting instructions
carefully. Fasten the mitre saw to the saw
mounting brackets securely as instructed.
• DO NOT modify or use stand for
operations for which it is unintended.
EN G LI SH
15