Thick Wire Ethernet - Mitsubishi Electric Apricot LS Pro Using Setup And Installing Add-Ons

Thick wire Ethernet

The Apricot LS Pro can be fitted with a thick wire Ethernet
assembly. If you bought an LS Pro without a thick wire
Ethernet assembly you can install one as follows.
1. Take suitable anti-static precautions, as described
earlier.
2. Obtain access to the system board as described in
your Owner's Handbook .
3. Identify the system board socket for the thick wire
Ethernet assembly, and the blanking plate in the
rear panel of the system unit from the illustration
below:
4. Remove the screw that secures the blanking plate,
and lift the blanking plate clear of the system unit.
24
BLANKING PLATE
SECURING SCREW