Fan - Brother HL-2290 Service Manual

9.14 Fan

(1) Release the Fan harness from the securing fixtures.
(2) Release each Hook to remove the Fan, and pull out the Fan harness from the Hole.
Harness routing: Refer to
Assembling Note:
• When assembling the Fan, insert the Fan harness into the hole to make sure that the
Fan harness is not caught.
• Attach the Fan so that the surface with the Label faces out.
<Back side>
Hole
Hook
Fig. 3-32
"2. Rear side of the machine".
3-38
Hook
Fan harness
Fan
Label
Confidential