Connecting To A Projector Or Monitor; Connecting To A Computer - Elmo MX-P2 Instruction Manual

◆CONNECTING TO A PROJECTOR OR MONITOR

To the AC adapter
DC power cord
HDMI cable
1. Connect the product to a projector or monitor with the HDMI cable or RGB cable.
2. Connect the supplied DC power cord to [
adapter. Then connect it to a wall outlet.
3. The product enters the standby status. (Status LED: Red)
4. Press the Power button to turn on the product. The image output will start.

◆CONNECTING TO A COMPUTER

The product is compliant to UVC (video class) standard. You can transfer the image via USB by
connecting the product to a computer using the USB3.0 cable (bus power).
To the USB 3.0 port
1. Connect the microB connector terminal of the USB3.0 cable to [
side of the product.
2. Connect the typeA terminal of the USB3.0 cable to the USB port of your running computer.
3. Set the resolution according to the description in P.13 using the UVC app.
2
1
RGB cable
USB3.0 cable
2
Type A
17
Resolution/Output mode selection
When connecting RGB only:
select between XGA and 1080p
When connecting HDMI:
select between Full and Normal (angle of view)
Flicker correction
Select the same value as the power supply
frequency of the location where the product is
used. (50Hz/60Hz)
]. Connect the USB plug to the supplied AC
Micro-B
1
3
] connector in the