Enseo Hd2000 RF User Manual page 5

7. Using the Enseo remote (not included), press 0-MENU-7-8-9.
• During Step 7, aim the remote at the HD2000RF, not the TV.
• If the sequence was successful, the HD2000 RF will turn on and display the setup channel.
8. Press SETUP on the Enseo remote and navigate to Service Options/TV Interface Type. Select the appropriate
type. TV will display "Please Wait Restarting..." and reboot.
Completing the Setup:
9. While the HD2000 RF is rebooting, connect the TV control cable to the HD2000 RF (it should already be con-
nected to the TV).
• When the TV has completed its reboot and gained control of the TV, it will power down the TV.
• From this point, one can use either the Enseo or the LG remote to issue commands.
RF IN
VIDEO AUDIO OUT DIGITAL
IN AUDIO
OUT
CONTROL NETWORK
AUDIO
HDMI
OUT
IN
DISPLAY PPV
USB
POWER
page 5