Table of Contents
Advertisement
USER MANUAL – MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
12)
BedJet Cloud Sheet Install. Skip to Step 13 if using BedJet with your own sheets.
Your engineered performance Cloud Sheet is as durable as your existing sheets for
regular washing and will give you many years of service when properly cared for. See
care label for washing instructions.
The Cloud Sheet lays on top of your body when in bed and replaces your regular top
sheet. Do not place any other bedding in between the Cloud Sheet and your body.
Place your normal bedding such as blankets, comforters or quilts on top of the Cloud
Sheet. The Cloud Sheet works best with the weight of your existing bedding on top of
it. You may keep your existing top sheets if they are placed only on top of the Cloud
Sheet.
Make sure This Side Down" label on Cloud Sheet faces
down towards the mattress. If you see this label, the Cloud
Sheet is upside down. The Cloud Sheet's top and bottom
fabric layers flow air at different rates and will not give the best
experience if installed upside down.
The Cloud Sheet
has
several
elastic
openings that accept insertion of the BedJet
Air Nozzle and Air Hose into the inside cavity
of the sheet. The elastic openings come
sealed with snap buttons. The snap buttons
are hidden until the elastic opening is
unbuttoned. The snap buttons may be
opened at the desired elastic opening
location by firmly pulling fabric on either side
of opening until all snap buttons release.
Open the sealed openings closest to your Air
Nozzle and Air Hose location identified in
Step 4, Page 9. Ensure all openings that
will not be used have snap buttons sealed
shut.
Revision 1.0 www.bedjet.com
P a g e | 13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3 and is the answer not in the manual?
Questions and answers
Why is my bed jet 3 not blowing air as hard as usual? The air filter isn’t that dirty and I’ve only had it for about a month
Your BedJet 3 may not be blowing air as hard as usual due to a clogged air filter. The device has a lifetime washable air filter located in the air intake grille, which requires cleaning every three months or more often if you have pets. Try rinsing and replacing the filter to restore airflow.
This answer is automatically generated
I have tried to set BedJet too 2 hours of heat but it reverts to 1 hour no matter what I try
When my bedjet is on heat mode set to 104, why does it continuously go from 104-82-104-82 and so on? It’s annoying.
Display on remote has stopped showing…it is still working but has no writing and is blank blue.