Table of Contents
Advertisement
USER MANUAL – MODEL 3 SKU: 3S-800NA
QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE!
®
Bedroom Forced Air Climate Comfort System
with Remote Control & Bluetooth App
This device is for residential home use only. It is not intended to be
used in commercial, industrial, or human medical settings.
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO INSTALL, OPERATE OR MAINTAIN THE
PRODUCT. PROTECT YOURSELF AND OTHERS BY
OBSERVING ALL SAFETY INFORMATION. FAILURE TO
FOLLOW INSTRUCTIONS COULD RESULT IN PERSONAL
INJURY OR PROPERTY DAMAGE!
SAVE THESE INSTRUCTIONS
Revision 1.0 www.bedjet.com
P a g e | 1
Advertisement
Table of Contents
Related Manuals for BedJet 3
Summary of Contents for BedJet 3
- Page 1 USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! ® Bedroom Forced Air Climate Comfort System with Remote Control & Bluetooth App This device is for residential home use only. It is not intended to be used in commercial, industrial, or human medical settings.
- Page 2 You have my promise to set things right. We also understand that the BedJet is a luxury product and that there are many in the world who cannot afford such luxuries. In recognition, know that a portion of the proceeds from every BedJet sale goes to charities for the less fortunate who do not have the benefit of enjoying such luxuries themselves.
- Page 3 Before starting installation, review the options below to ensure you have ordered the very best setup for your needs. Important definitions: • Single Zone installs have 1 BedJet on the bed. BedJet Cloud Sheet is optional and ordered separately, but is recommended for the very best experience.
- Page 4 BedJet experience. Loose knit blankets with no top sheet or no comforter will also result in sub-optimal experience. These types of bedding will allow the BedJet air to escape at the bottom of the bed near the nozzle and only cool/warm your feet instead of circulating through the whole bed.
- Page 5 USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Pre-Installation Checklist Before installing your BedJet, please verify the following parts from your BedJet 3 package: Adjustable Height BedJet 3 base unit...
- Page 6 For reference, the Low Power switch only impacts Heating mode power. Setups with two BedJets in the same bedroom (such a Dual Zone setups) should set Low Power switch ON. Users with a single BedJet on a twin-size bed should also set the Low Power switch ON.
- Page 7 Assemble the Mattress Mount parts using the Height Extending links as shown below. All parts should snap-lock together. Enough Height Extending Links are included for mattresses up to 20” thick. Start with installing 2 or 3 Height Extending Links on your first try, more can be added or removed later as needed.
- Page 8 BedJet Using Your Own Sheets: SKIP THIS PAGE IF USING BEDJET CLOUD SHEET If you are using your own sheets with the BedJet, determine the best location on your bed to install your Mattress Mount Assembly, which holds the Air Nozzle and Air Hose in place.
- Page 9 BedJet Using a Cloud Sheet SKIP THIS PAGE IF USING YOUR OWN SHEETS If installing your BedJet with the Cloud Sheet, determine the best location on your bed to install your Mattress Mount Assembly, which will hold the Air Nozzle and Air Hose in place.
- Page 10 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Slide the Mattress Mount base under your mattress in the location identified in Step 3 or Step 4. Slide the Mattress Mount base as deeply as possibly under the mattress until the Mattress Mount is flush against the mattress.
- Page 11 If cord cannot conveniently reach a power outlet, it may be helpful to move BedJet closer to the outlet. We also offer a low cost Air Hose extension, giving 8-feet total Air Hose length. The Air Hose extension will allow you to place the BedJet nearly anywhere under the bed or around the bed to be closer to a preferred power outlet.
- Page 12 Before BedJet is placed under the bed, familiarize yourself with turning on and off the various operating modes (Heat, Cool, etc) while the Status and Control Panel of the BedJet is easily visible. The best location for the BedJet is under your bed.
- Page 13 QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! BedJet Cloud Sheet Install. Skip to Step 13 if using BedJet with your own sheets. Your engineered performance Cloud Sheet is as durable as your existing sheets for regular washing and will give you many years of service when properly cared for.
- Page 14 Excessive bedding weight on top Cloud Sheet may cause low performance. If Cloud Sheet does not puff up and inflate with BedJet at full air flow, then reduce bedding load on top of Cloud Sheet. If you are using your own sheets, cover the Air Nozzle with your sheets and/or comforter.
- Page 15 6.25 inches height clearance. In these cases, the bed frame may be lifted up and the BedJet placed underneath. As long as the mattress or frame does not rest on the BedJet and the 3”...
- Page 16 USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! BedJet Operating Modes Operating Mode Summary Regulated Maximum Remote Best For Temperature Auto-Shutoff Control Mode Range...
- Page 17 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Cooling Mode - Tips for Better Enjoyment The BedJet cools via powered ventilation of fresh ambient air injected directly into the bed. This powered ventilation gently wicks away the body heat and body moisture that gets trapped in the bed by your mattress and bed covers.
- Page 18 Feet-only cooling results from use of a top sheet that is not compatible with the BedJet or use of no top sheet at all or just a loose-knit blanket. At 100% airflow your bed should have nearly all of your bedding ballooning slightly off the bed and air flow will be felt exiting at the very top of the bed from under the top sheet.
- Page 19 • Try using the Turbo Heat mode as a pre-heater five to ten minutes before you get into bed. Turbo heat can make your bedding feel like it just came out of the dryer in only 3 minutes. Get in with as few clothes on as you can and enjoy the cuddly warmth directly on your skin.
-
Page 20: Specifications
WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! Specifications The BedJet has been designed to operate as a safe extension of your bed. This product has been rigorously tested by an accredited 3 party testing lab to be qualified as a safe electric appliance. -
Page 21: Important Safety Instructions
2. WARNING – Do not use this heated bed system with any other heated – blanket, comforter, quilt, sheet, mattress pad, mattress, foot warmer, throw blanket or similar heated bedding. 3. Let power cord hang free – Do not place between mattress and foundation. Do not allow the cord to be pinched. - Page 22 14. This device has hot and arcing or sparking parts inside. Do not use the BedJet in areas where gasoline, paint, or flammable liquids are used or stored. It must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres.
- Page 23 23. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
- Page 24 USER MANUAL – MODEL 3 SKU: 3S-800NA QUESTIONS? EMAIL INFO@BEDJET.COM OR CALL 401-404-5250 WE ARE HERE TO HELP – PLEASE CALL US FOR ADVICE! THIS DEVICE IS A DOUBLE INSULATED PRODUCT: SERVICING OF DOUBLE-INSULATED PRODUCTS In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated product, nor is a means for grounding to be added to the product.
- Page 25 All claims against BEDJET LLC must be brought within three (3) months from the time they arise. As some states do not allow, or restrict, limitations on how long an implied warranty lasts, some or all of the foregoing may not apply to you.
Need help?
Do you have a question about the 3 and is the answer not in the manual?
Questions and answers
Why is my bed jet 3 not blowing air as hard as usual? The air filter isn’t that dirty and I’ve only had it for about a month
Your BedJet 3 may not be blowing air as hard as usual due to a clogged air filter. The device has a lifetime washable air filter located in the air intake grille, which requires cleaning every three months or more often if you have pets. Try rinsing and replacing the filter to restore airflow.
This answer is automatically generated
I have tried to set BedJet too 2 hours of heat but it reverts to 1 hour no matter what I try
When my bedjet is on heat mode set to 104, why does it continuously go from 104-82-104-82 and so on? It’s annoying.
Display on remote has stopped showing…it is still working but has no writing and is blank blue.