Related Manuals for Levolor PREMIUM 6-CHANNEL REMOTE
Summary of Contents for Levolor PREMIUM 6-CHANNEL REMOTE
- Page 1 Roller Shades Remote Control Guide Guía del control remoto para persianas en rollo Guide de la télécommande pour stores à enroulement automatique...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Thank you for purchasing a LEVOLOR motorized window ® covering. This guide will help you set up and operate your new remote control and help you understand all functions and capabilities, allowing you to make the most of your new window coverings. -
Page 3: Remote Control Buttons
REMOTE CONTROL BUTTONS Programming Light Favorite Indicator Light Groupings Open, Closed, Stop Stop. Arrow = no function for Roller Shades Groupings Battery Compartment Reset Button FRONT BACK Button Key Symbol Function LED Light Color Select all shade groups at once Groupings 1 ,2, 3, Shade Groups... -
Page 4: Explanation Of Functions
A window covering will not operate with the remote, unless it is assigned to a GROUP. Each LEVOLOR remote offers 6 GROUP ® assignments, designated by buttons numbered 1, 2, 3, 4, 5, and 6 on the remote. -
Page 5: Travel Limit/Stops
Button (located The standard power source provided inside of unit) with the LEVOLOR motorized operating system. ® The battery pack is a tube of batteries that is connected to and is installed behind the headrail to supply power to the window covering, allowing it to link and function with the remote. -
Page 6: Levolor App Overview
Download the app to your mobile device from the Google Play or Apple App Store. The LEVOLOR App is compatible with Android (version 5.1 or newer) and Apple iOS (version 11.0 or newer). -
Page 7: Getting Started
GETTING STARTED BATTERY PLACEMENT 1. Remove the back cover, to expose the battery compartment. 2. Use two new AAA Alkaline batteries (provided). Slide a battery into each compartment being sure to align correct positive and negative ends and press into place. 3. -
Page 8: Activating And Operating
ACTIVATING AND OPERATING JOIN A WINDOW COVERING TO A GROUP NOTE: The LEVOLOR remote will not operate a window ® covering until the window covering has been added to a GROUP. 1. Press and hold STOP until the WHITE programming light on the lower left of the remote starts flashing, then release. -
Page 9: Operating Window Coverings
ACTIVATING AND OPERATING 4. While continuing to hold down the manual control button, use your other hand to press and hold ♥ FAVORITE on the remote until the window covering moves slightly to indicate it has set this window covering position as your FAVORITE. 5. -
Page 10: Remove A Window Covering From A Group
ACTIVATING AND OPERATING REMOVE A WINDOW COVERING FROM A GROUP 1. Press and hold STOP until the WHITE programming light on the lower left of the remote starts flashing, then release. This puts the remote in program mode. 2. Press the desired GROUP number (1, 2,3, 4, 5, or 6) on the remote. -
Page 11: Additional Programming
ADDITIONAL PROGRAMMING NOTE: Without any additional programming, this remote will now operate the same set of window coverings and GROUPS as the original remote OR use the instructions on page 8 to “Join a shade to a group” to program the second remote differently from original, to control a different set of shutters and/or different GROUPS. -
Page 12: Battery Replacement
BATTERY PLACEMENT CUSTOMIZING BOTTOM STOP LIMIT 1. Press and hold the motor activation button on the shade, while at the same time pressing and holding CLOSE button on remote. The motor’s LED will illuminate red and the shade will begin to lower. 2. -
Page 13: Trouble Shooting
TROUBLE SHOOTING TROUBLE SHOOTING Problem Window covering does not operate with the remote control. Solution Make sure the Indicator light on the remote control comes on when you try to operate the window shading. If the Indicator light does not come on, replace the batteries in your remote control. -
Page 14: Radio Frequency Compliance
COMPLIANCE / WARRANTY U.S. RADIO FREQUENCY FCC COMPLIANCE STATEMENT U.S. Radio Frequency FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 15: Warranty
Class B Digital Device Notice This Class B digital apparatus complies with Canadian ICES-003, RSS-Gen and RSS-210. WARRANTY For warranty information visit LEVOLOR.com or contact customer service at 1-800-538-6567 Remote Control Guide... - Page 16 © 2019 LEVOLOR , Inc. ® 3 Glenlake Parkway NE 18-0053-025 Atlanta, GA 30328 1003111...
Need help?
Do you have a question about the PREMIUM 6-CHANNEL REMOTE and is the answer not in the manual?
Questions and answers