Advertisement
【Installation Method】
C. Wall mount type method
1. Applicable to the bathroom without ceiling.
2. Firstly set the support stick transverse stability to the wall, then embed the main body on the
support.
3. Set the exhaust pipe (4" （ 100mm) ) to the glass window. Fix the exhaust pipe to the air outlet
joint with tape or metal clamp.
4. Applicable size of the main body: 420x320mm
*need to reserve 200 mm on the right side to install the exhaust pipe and air outlet joint.
Thickness of the main body：216mm
5. The minimum distance between the surrounding structures should be 50cm。
【Air Exhaust】
Please avoid the following situations when installing the exhaust pipe.
1. Over bending.
2. Bending too much.
3. The bend of the pipe comes too
close to the main body.
4. The bend shrinks.
200mm
‐ 10 ‐
Advertisement
