Table of Contents
Advertisement
HEAdbOARd bRAckEt iNStALLAtiON
Install headboard brackets to the bed base frame*. When attaching (2)
twin size units to a king size headboard an optional swing hinge kit (see
accessory section) may be used to connect the twin units.
* S-cape
and S-cape
®
Silhouette™, Pro-Motion™, and Bronze are Type B bed base frames.
NOTE
FAILURE TO FOLLOW HEADBOARD BRACkET
INSTALLATION INSTRUCTIONS MAY CAUSE
HEADBOARD BRACkET INTERFERENCE WITH
BASE FOAM DURING BED OPERATION. BASE
FOAM OR BASE COvER DAMAGE COULD
RESULT.
NOTE: It is important to position the bottom of the headboard cross
member a maximum distance of 3 inches (76.2mm) between the
headboard and the top of the mattress (FIGURE 7). Do not exceed 3
inches (76.2mm).
figure 7: headboard cross member location must not exceed 3 inches
(76.2mm) from the top of the mattress.
iNStALLAtiON
Platform are Type A bed base frames.
®
Power Foundations Owners Manual 99300787-k
11
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the S-cape and is the answer not in the manual?
Questions and answers
how to raise and lower the bed with remote
The Leggett & Platt S-Cape bed can be raised or lowered using the wireless remote. The remote allows you to adjust the head and foot sections of the bed to find a comfortable position. Additionally, it includes a flat button that returns the bed to a level position. The remote also features a zero gravity button and two programmable position buttons for convenience. If the remote is non-wired, ensure batteries are installed before use.
This answer is automatically generated