Using the Surface Mount Adapter
The camera is provided with a surface mount adapter that can be mounted to a wall or ceiling.
If the camera needs to be installed with the in-ceiling mounting adapter (H5M-MT-DCIL1), see
Using the In-
Ceiling Mounting Adapter on page 20
for more information.
Cables Routed from Inside Mounting Surface
Perform the following steps if the required cables are coming from inside the mounting surface and the
camera will be mounted immediately over the cable hole. Use this procedure on surfaces that can be easily
drilled into, and when the cables should be kept out of sight.
Perform the following steps to mount the surface adapter to the mounting surface:
1. Use the mounting template to drill three mounting holes into the mounting surface and drill or cut the
cable entry hole.
2. Pull the required Ethernet cable through the cable entry hole and the cable entry hole in the
Using the Surface Mount Adapter
13