Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual page 24

A200/A100 Hardware
Heat Dissipation
− Mount the unit in any of the following arrangements to facilitate heat dissipation.
Do not mount the unit on top of strong heat sources such as heaters, transformers, or
high−capacity resistors.
About Mounting Space
− When installing the unit, aim to leave at least 50mm between the controller and any
nearby objects such as ducts or other equipment. Controller replacement and wiring
will be easier this way.
− When you install doors or other equipment in front of the controller's front panel
provide at least a 100mm space between the controller and the equipment in order
to avoid noise and heat effects.
− Provide at least 100mm of space in front of the controller's front panel to provide for
the keypad connection and wiring.
2.2
50mm or more
50mm or more
Installation Environment and Mounting Space
Contact mounting
is acceptable.
100mm or more
50mm or more
Installation and Wiring
2 − 5