Related Manuals for Pump House PH-5.0L-HDHW
Summary of Contents for Pump House PH-5.0L-HDHW
-
Page 1: Installation Instructions
PH-5.0L-HDHW Heavy Duty Hot Water Installation Instructions Pump House Glaisdale Drive East Nottingham NG8 4LY Tel: 0115 900 5858 sales@pumph.co.uk www.pumph.co.uk... - Page 2 PH-5.0L-HDHW Installation Instructions SPECIFICATION PH-5.0L-HDHW M o d e l PH-5.0L-HDHW H e i g h t 350 mm Inlet Height 350 m m M a x F l o w 32 L/Min M a x H e a d...
- Page 3 This shut off will be reduced if bends and horizontal runs are included in the outlet pipe work. If in doubt please contact Pump House for advice - RULE OF THUMB: 10m Horizontal = approx. 1m vertical 3. At highest point angle the pipe horizontally to create a downward slop to drainage point. Terminate the end of the pipe to comply with current regulations.
- Page 4 PH-5.0L-HDHW Installation Instructions COMMISSIONING & TESTING 1. Before commissioning, check for debris in the tank. Remove any material which might block the drain line or drain into the pump tank. 2. Turn on power. 3. Slowly fill the tank with clean water to prime the pump, as the float rises to the On Level position the motor should turn on.
Need help?
Do you have a question about the PH-5.0L-HDHW and is the answer not in the manual?
Questions and answers