CLOCK
1
The time is displayed when the
ignition is switched on.
2
Setting the time on the clock 1
- press button 2 for approximately
three seconds to enter time setting
mode,
- when the hour flashes, press
button 2 again to adjust it,
- wait approximately three seconds,
the minutes will begin to flash,
then press button 2 to adjust them,
- wait approximately three seconds,
the minutes will stop flashing, the
time is set.
1
2
If the electrical supply is cut
(battery disconnected, feed wire
broken, etc.), the clock will not
display the correct time.
The clock must be reset.
We recommend that you do not
make these settings while driving.
1.71
Need help?
Do you have a question about the Modus and is the answer not in the manual?
Questions and answers