• Leave it unattended on holidays • Safekeeping the instruction. For reconstruction the pool set every time, please always refer to the instructions. • If instruction is missed, please contact with Bestway or search it in website: www.bestwaycorp.com S-S-004999 S-S-004999/58397AU/21.0x28.5cm/530gal 澳规砂滤器说明书 JS-YF-2016-B-08868/英...
Page 4
• Please examine and verify all sand filter components are present before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase.
SPECIFICATIONS Filter Diameter 270mm 0.059m (0.635ft Effective Fiter Area: Max. Operating Pressure: 0.42Bar(6PSI) Working sand filter pressure: <0.25Bar(3.5PSI) 703mm 270mm Max. Water Temperature: ℃ Sand: Not included #20 silica sand, 0.45-0.85mm Sand Size: Sand Capacity: Approximately 8.5kg 311mm REF.NO SPARE PART NO. P61138 P61140 P6540...
Page 6
Assembly (You will need a screwdriver). 1. Carefully remove all components from the package and check to ensure nothing is damaged. If equipment is damaged, immediately notify the retailer from where the equipment was purchased. 2. The sand filter should be placed on solid, level ground, preferably a concrete slab. Position Ø8mm the sand filter so the Ports and Control Valve are accessible for operation, servicing and winterizing.
Page 7
Garden hose (not included) For Drain, Backwash, Rinse function P61318 P6680 S-S-004999 S-S-004999/58397AU/21.0x28.5cm/530gal 澳规砂滤器说明书 JS-YF-2016-B-08868/英...
STOP Before switching on, please read the manual carefully. OPERATION CONTROL VALVE OVERVIEW WARNING: To prevent equipment damage and possible injury, always switch off sand filter before changing the Control Valve function. Changing valve positions while the pump is running can damage the Control Valve, which may cause personal injury or property damage.
NOTE: • Be sure all provisions for wastewater disposal meet applicable local, state or national codes. Do not discharge water where it will cause flooding or damage. • When the Control Valve is set to the Backwash, Rinse, or Drain position, water will discharge from Port D on the Control Valve.
Cleaning the Strainer 1. Switch off the sand filter and set the Control Valve to the Closed function. 2. Replace the Debris Screens with Stopper Plugs to prevent water from escaping. 3. Remove the Strainer Cover by unscrewing it. 4. Take out the Strainer, remove any debris. 5.
To enact a warranty claim, this form must be completed and submitted with a copy of To enact a warranty claim, this form must be completed and submitted with a copy of your receipt to your local Bestway After Sales Center.
Need help?
Do you have a question about the Flowclear 58397 and is the answer not in the manual?
Questions and answers