Page 1
Brean 4 Classic AIR Instructions & care manual Some of the images shown in these instructions are other similar Kampa tents and are for illustration purposes only.
Page 2
WELCOME Thank you for purchasing your Kampa AirFrame tent. Please read these instructions carefully before attempting to set up your tent and retain for future reference. If used properly, your tent should give you years of trouble free use. We recommend that your tent is insured against accidental and storm damage as this is not covered by the warranty.
Page 3
Before using for the first time please check the contents of your tent Item Tent Inner tent Front canopy pole Hand pump Peg bag Carry bag The inner tent may already be attached to the tent and can be left attached for take down and setup.
Page 4
Unroll and lay the tent out in the required position (1). Peg each corner of the tent ensuring that you tension the tent between the pegs and making sure that the tent keeps it rectangular shape. You will probably need to re-peg later. IMPORTANT important that...
Page 5
Starting from one end of the tent, unscrew the top cap, of the inflation valve, and attach the pump nozzle (4). Pump up each AirPole. (5). The pump has a pressure gauge and each AirPole should be inflated to 7 psi (0.482 bar).
Page 6
Inflate the central ridge pole and locate in the peak of the tent between the front and middle pole. There are velcro pads at each that attach to the velcro on the pole sleeves. If the inner tent is not already installed, take the inner tent inside and suspend from the colour coded buckles (8).
Page 7
PEGS The tent comes complete with general purpose pegs. These will be suitable for many sites but there will be some instances where different pegs will be necessary. Your dealer will stock a range of pegs suitable for different types of ground.
Page 8
Never force a zip. We strongly recommend that you carry a comprehensive spares kit including silicone waterproof spray, seam sealer and tape for repairing the AirPoles. Repairs to the tent should be made by a company recommended by Kampa or your supplying dealer. Repairs and alterations made by an unauthorised...
Page 10
Once located the tube can be repaired using repair tape. We recommend Kampa Tent & Awning Repair Tape—available from your dealer. The repair can be enhanced by using a combination of the tape with Kampa Repair Solution. Follow the manufacturers instructions to repair.
Page 11
OPTIONAL EXTRAS AVAILABLE FOR YOUR TENT FOOTPRINT goes under your tent to protect and keep the groundsheet clean. CARPET adds a luxury feel to the living area of your tent. Insulating and soft underfoot. WINDBREAK provides privacy and protection from the wind.
Need help?
Do you have a question about the Brean 4 Classic AIR and is the answer not in the manual?
Questions and answers