Using The Backlight - Crivit HG00734A Operation And Safety Notes

EASY will be flashing on display. Press and
hold the SET button
mode setting.
Press the SET button
MODE button
dividual settings (i. e. CLOCK).
Select "ON" to add the selected function to
EASY mode. Select "OFF" if you do not wish
to add the selected function to EASY mode.
Press the SET button
Press the MODE button
next function and repeat the steps as de-
scribed above.
Press the MODE button

Using the backlight

Note: To use the backlight function, it must be set
in advance. See "Changing basic settings".
Press the SET button
the backlight. The backlight will switch off au-
tomatically after a short amount of time.
to enter CUSTOMIZE
20
again. Press the
20
to activate or deactivate in-
14
to confirm your entry.
20
to proceed to the
14
to exit settings.
14
to temporarily activate
20
GB 41