Table of Contents
Advertisement
Slide-rail front
d.
Repeat steps to to attach the other outer slide-rail.
Installing the console unit in the rack
To install the console unit in the rack, complete the following steps:
Step 1.
Extend the inner part of the outer slide-rails and slide them forward to the front of the outer rails.
Carefully slide the rollers on the console unit into the notch in the slide-rails as shown in the
illustration.
Step 2.
Press in both release latches
into the rack
2
console unit out halfway, and then push it back in to seat the console unit in the rails. Do this a few
times until the console unit moves smoothly in the rails.
46
1U 18.5-inch Standard Console Installation and Maintenance Guide
1
; then, grasp both sides of the console unit and push it completely
. There will be resistance initially as the inner and outer rails are aligned. Pull the
Hide quick links:
Advertisement
Table of Contents
