Table of Contents
Advertisement
Repeat step Step 7 on page 37 and step Step 8 on page 38 for the other outer slide-rail.
Step 9.
Remove the shipping screw from each new outer slide-rail.
Slide-rail rear
Shipping screw
Step 10. To attach the outer slide-rail to the rack, complete the following steps.
Note: Install the rear slide-rail bracket to the rear of the rack first; then, install the front slide-rail
bracket to the front of the rack.
a.
Holding the slide-rail horizontally, align the rear slide-rail bracket so that the bracket is on the
outside of the rack mounting flanges.
b.
Press the rear slide-rail bracket toward the rack flange and then pull it towards the front of the
rack until the locking bracket clicks into place behind the rack flange.
c.
Extend the slide-rail and press the front slide-rail bracket toward the rack flange and then push
it towards the rear of the rack until the locking bracket clicks into place behind the rack flange.
Shipping screw
Slide-rail front
Slide-rail rear
.
Chapter 4
Hardware maintenance information
39
Hide quick links:
Advertisement
Table of Contents
