Assembly Of Chassis & Column Unit - Beko EFS5100W User Manual

3 Assembly of chassis & column unit
1. Unscrew the 7-shape bolt from the extension pole. (Fig.1)
2. Insert the extension pole into the chassis and tighten the 7-shape bolt (Fig.2)
3. From the extension pole loosen the height adjustment ring and adjust the internal pole to the
desired height.
C
Note: If you can't find the internal pole, it must inside the extension pole. You can pull it
out from the extension pole. (Fig.3)
4. To attach the head unit to the internal pole, loosen the thumb screw on the bottom of the head
unit. Place the head unit on the internal pole and tighten the thumb screw in alignment with the
groove on the internal pole. (Fig.4)
A
Warning: Height adjustment ring must be fully fastened before the assembly of the motor
section to the internal pole.
Fig. 1
Fig. 3
Stand fan / User Manual
Fig. 2
Fig. 4
Loosen
Mounting hole
Thumb screw
Annular groove
7 / 12 EN