Hitachi HIDIC EH-150 Applications Manual page 75

8 Download
S T E P
1. Download the configuration data to the EH-RMD.
Enable the on-line mode.
Right-click the EH-RMD and click [Download to Device].
By clicking [Network] and then [Download to Network], access is made to all the devices on the network.
In this case, depending on the device, there is a possibility that a warning or error may be generated; the data should
therefore be downloaded directly to the EH-RMD by clicking [Download to Device].
The confirmation dialogue box is displayed; click [Yes].
This completes the setting in RSNetWorx.
Verify that the network status LED (NS) of the EH-RMD and each slave device is lit in green.
The configuration data is stored in the FLASH memory within the EH-RMD.
Please don't turn off the power for 10 seconds while updating Flash memory.
8-17
Chapter 8 Starting Up