Tutek Tambero Instruction Manual page 9

1. Unfolding the chassis [1]
Raise the handle to hear the CLICK of locking elements.
WARNING:
Ÿ The chassis locks need to click into the locked position.
Ÿ Make sure the safety lock locked.
Ÿ Remember to raise the lock before unfolding and lock
it after the chassis is unfold.
2. Folding the chassis [2]
Ÿ Make sure that the brake is engaged.
Ÿ To fold the stroller release (raise) the safety lock and,
simultaneously, pull the locking devices along the both
sides of the chassis up to release the lock and move the
handle up.
Ÿ If you need to make more space you can remove the
wheels (see par. 4 and 7).
Ÿ Wipe off any dirt or grease from the axles before you
replace the wheels.
1
3. Rear wheels assembling [4]
Make sure that the brake is off. To attach the wheels to the
axles : Press in the lock button on the wheel. Insert the
wheel to the end of the axis and release the lock button.
Pull the wheel gently off, the safety pin should lock into the
axle groove with the click, which indicates the correct
attachment of the wheel.
IMPORTANT: Check by pulling off the correct
installation of the wheel.
4. Rear wheels detachment
Press in the lock button on the wheel and pull the wheel off.
4
5. Parking brake engagement [5]
To engage the brake push down the brake lever with the
foot in a way to lock the gear wheel which is the part of the
stroller rear axle. In order to disengage the brake pull the
brake lever up with the foot.
WARNING!
Use the parking brake only when the stroller is completely
stopped. Before moving the stroller make sure the brake is
disengaged (released). The manufacturer do not takes
responsibility for damages of gear wheels and other brake
system components resulting of disregard instructions
above.
5
GB
-9-
6. Front wheels assembling
To attach front wheel insert the swivel axle into vertical
front wheel hub to hear the click.
IMPORTANT: Pull the wheel down to make sure that it is
properly locked.
7. Front wheels detachement [6]
To detach front wheel, press the button at the top of the
swivel mechanism and pull the wheel down.
8. Front wheels swivel lock [7]
To lock the front swivel wheels turn right the ring over the
front wheel of the stroller. To unlock, turn the ring left.
2
9. Stroller's suspension adjustment [8]
The rear wheels are equipped with the suspension (shock
absorber) adjustment.
To adjust stroller suspension (soft - rigid) turn the
adjustment lever under the rear wheel axle.
8
10. Handle adjustment [9]
Adjust the handle by pressing the grey buttons on the
outside of the handle simultaneously.
Without releasing the buttons adjust the handle upwards or
downwards to the desired position
6
7
9