Faq's For Touch Screen - Philips 190S6FGT/00 User Manual

Ergonomics, Ecology and Safety Standards
Q: What is the CE mark?
A: The CE (Conformité Européenne) mark is required to be
displayed on all regulated products offered for sale on the European
market. This 'CE' mark means that a product complies with the
relevant European Directive. A European Directive is a European
'Law' that relates to health, safety, environment and consumer
protection, much the same as the U.S. National Electrical Code and
UL Standards.

13.3.7 FAQ'S FOR TOUCH SCREEN

Q: I can not install the driver for my operating system:
A: Do you have the right driver for your operating system. Drivers
available at one touch, category 5 wire resistive for serial
connectors:
http://www.onetouch.com.tw/en/driver/rs232.htm
Q: After installation I can not calibrate the screen. The touch does not
respond.
A: Check the cables: 9 pin serial connector plugged and the PS2 plug
connected to your keyboard PS2 socket on your computer (for 5
volts power supply).
A: Check if you connected to the right COM port if you have more
then one ( you can change the communication port as shown above )
A: Is there any software that uses the COM - (serial) port such as
other touch screen drivers / analog modem / previous drivers that
used the port / software that polls or controls the port.
Q: The installation was successful, but when I touch the screen, the
cursor jumps to all directions or not aligned to my finger
A: Re-calibrate the touch screen.
55
User Manual 190S6FGT