7. BASIC FUNCTIONS
1
2
7.1
POWERING ON/OFF
2 ) at the bottom of the monitor, to switch the
Push the power switch (
monitor on/off.
Status LED (1):
■
Not Illumated = No AC Power detected
If the main power switch (rear of panel) is turned off, this LED will
not illuminate.
■
Orange = Stand-by (Power OFF) with AC power detected
The LED will illuminate in orange color if the monitor is in stand-by
mode.
■
Solid Green = Power ON
7.2
TOUCH SCREEN FUNCTION
The built-in touch screen basically acts as a standard PC mouse function.
For this purpose a CD-rom with drivers and manual has been included in
the package.
For application support:
■
See the FAQ list in the Appendix of this manual.
■
Contact the application support helpdesk, by calling one of the
telephone numbers of the Philips service organisation in the
Warranty's chapter of this manual.
7.3
ON-SCREEN DISPLAY MENU
What is the On-Screen Display?
On-Screen Display (OSD) is a feature in all Philips LCD monitors.
It allows an end user to adjust screen performance or select functions of
the monitors directly through an on-screen instruction window.
Accessing OSD Menu via Remote Control or Front Panel
The On-Screen Display (OSD) menu allows access to setup various
parameters equipped with this display.
1 To access the OSD menu, press the arrow up/down buttons on the
monitor panel.
2 To navigate through the OSD Menu use the arrow left/right buttons
on the monitor panel.
3 To confirm the selection or change press the OK button.
27
User Manual 190S6FGT