Installation Notes - Bosch Rexroth VSB 40.1 Project Planning Manual

VSB 40.1
5.3

Installation Notes

DOK-SUPPL*-VSB*40.1***-PR01-EN-P
• Avoid installation locations exposed to direct sunlight, as additional
heat development can occur.
• When determing installation location and mounting position observe,
that the optionally available drive can be opened unobstructed.
• Install the VSB in a manner ensuring easy access to the connector
panel.
• Provide a sufficient minimum clearance of 50 mm for cooling and
cable routing around the device.
• Lay all connecting cables in loops and use strain reliefs for all cables.
• Keep a suitably large distance from sources of interference.
• Fasten the VSB with four screws M6 at the integrated mounting
brackets.
Dimensions and Installation Notes
5-5