Related Manuals for WAGNER W 890 FLEXIO
Summary of Contents for WAGNER W 890 FLEXIO
- Page 1 UNIVERSAL SPRAYER W 890 FLEXIO ORIGINAL- BETRIEBSANLEITUNG wagner-group.com...
- Page 2 W 890 Flexio 24/25...
- Page 3 W 890 Flexio...
- Page 4 W 890 Flexio ...
- Page 5 W 890 Flexio 20-30 cm ...
- Page 6 W 890 Flexio ...
- Page 7 W 890 Flexio...
- Page 8 W 890 Flexio ................1 - 20 ................21 - 39 ................40 - 59 ................60 - 79 ..........82 ++ ...
-
Page 9: Table Of Contents
Translation of the original operating instructions MANY THANKS FOR PLACING YOUR TRUST IN US We would like to congratulate you on purchasing this brand product from Wagner; we are sure that you will enjoy working with it greatly. Please read the Operating Manual carefully and observe the safety information before starting the device. -
Page 10: Explanation Of Symbols Used
W 890 Flexio 26. Important Note regarding Product Liability! ........36 27. - Page 11 W 890 Flexio b) Never use the tool in hazardous areas that contain flammable liquids, gases or dusts. Power tools generate sparks that can ignite the dust or vapors. c) Keep children and other persons away when using the power tool. You can lose control of the tool if you are distracted.
- Page 12 W 890 Flexio d) Remove setting tools or wrenches before switching on the power tool. A tool or wrench that is in a rotating tool part can lead to injuries. e) Avoid an unnatural posture. Ensure that you are standing securely and have your balance at all times.
-
Page 13: Safety Instructions For Spray Guns
W 890 Flexio 5. Service a) Have your tool repaired only by qualified specialist personnel and only with original spare parts. This ensures that the tool safety is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer or it’s service agent or a similarly qualified person in order to avoid a safety hazard. -
Page 14: Description/ Scope Of Delivery
• Do not lay the spray gun. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. 4. Description/ Scope of delivery Description/ Scope of delivery (Figs. 1+2) -
Page 15: Field Of Application
W 890 Flexio 5. Field of application Many different coating substances can be processed with the W 890. A different spray attachment must be used, depending on the coating substance: Coating Materials Spray attachment Low-viscosity coating substances: Standard Water- and solvent-based paints, finishes,... -
Page 16: Preparation Of The Coating Material
W 890 Flexio Pay attention to the quality of the adhesive tape used. Do not use excessively strong adhesive tape on wallpaper and painted surfaces, in order to avoid damaging these surfaces when removing the tape. Remove adhesive tape slowly and evenly; do not use jerky movements. -
Page 17: Setting The Amount Of Air (Fig. 7, Item 1)
W 890 Flexio 4. Remove the spray attachment from the deposition tray. Unscrew the container from the spray attachment. 5. Align the ascending tube. (Fig. 5) If the ascending tube is positioned correctly, the container contents can be sprayed without almost any residue. When working on lying objects: Turn the ascending tube forwards. -
Page 18: Adjusting The Material Volume (Standard Spray Attachment)
W 890 Flexio 12. Adjusting the Material Volume (Standard spray attachment) Set the material volume by turning the regulator on the trigger guard of the spray gun. (Fig. 7, 3) lower material volume turn anti-clockwise (-) higher material volume turn clockwise (+) ... -
Page 19: Spray Technique
W 890 Flexio Fig. 12 A = vertical flat jet for horizontal surfaces Fig. 12 B = horizontal flat jet for vertical surfaces Use the red adjustment lever to also switch between a wide ( ) and a narrow ( ) spray jet. -
Page 20: Interruption Of Work Till 4 Hours
W 890 Flexio 17. Interruption of Work till 4 Hours • Turn the machine off. • During longer breaks, vent the container by briefly opening and then closing it again. • Clean nozzle openings after an interruption in operation. •... -
Page 21: Cleaning The Wall Extra I-Spray Spray Attachment
W 890 Flexio Clean the air cap, nozzle seal and nozzle with a brush and solvent or water. 4) Clean the outside of the spray gun and container with a cloth soaked in solvent or water. 5) Assemble the parts again (see “Assembly”). -
Page 22: Maintenance
W 890 Flexio Assembly Attention! Never operate the device if the nozzle seal is either damaged or missing. If the nozzle seal is either missing or damaged liquids can enter the device and increase the risk of an electric shock. -
Page 23: Spare Parts
W 890 Flexio 23. Spare Parts Spare Parts List Standard spray attachment (Fig. 24) Pos. Designation Order No. Standard spray attachment complete with 600 ml container 2365 054 Union nut 2362 873 Air cap 2362 877 2362 878 Nozzle 0417 706... -
Page 24: Accessories
24. Accessories The CLICK&PAINT SYSTEM with additional spray attachments and accessories offers the right tool for each work. Further information about the WAGNER range of products for renovating is available under www.wagner-group.com 25. Environmental protection The device and all accessories and packaging have to be recycled in an environmentally friendly manner. -
Page 25: Correction Of Malfunctions
W 890 Flexio 27. Correction of Malfunctions Malfunction Cause Remedy • No coating Nozzle clogged ➞ Clean • material emerges Material quantity too small ➞ Increase the quantity of from the nozzle material • No pressure build-up in container ➞ Tighten container •... -
Page 26: Technical Data
W 890 Flexio Malfunction Cause Remedy • Poor covering Spray material is too cold ➞ The material you are capacity on the spraying should be at wall room temperature • Highly absorbent surface or paint ➞ Cross spray (Fig. 14) with poor covering capacity •... - Page 27 The guarantee expires if the tool is opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to faulty maintenance work are not covered by the guarantee. Under any guarantee claim, there must be proof of purchase of the tool through submission of the original receipt.
- Page 28 W 890 Flexio EU Konformitätserklärung Wir erklären in alleiniger Verantwortung, dass dieses Produkt den folgenden einschlä- gigen Bestimmungen entspricht: 2006/42/EG, 2014/30/EU, 2011/65/EU, 2012/19/EU Angewandte harmonisierte Normen: EN 60745-1, EN 50580, EN 62233, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 Die EU Konformitätserklärung liegt dem Produkt bei.
- Page 29 W 890 Flexio...
- Page 30 Attiki, Greece P.O. BOX 293 T 22990 41056 F 22990 41059 Irrtümer und Änderungen vorbehalten. Not responsible for errors and changes. Part. No. 2361906 B 08/2017_RS Sous réserves d’erreurs et de modifications. © Copyright by J.Wagner GmbH Fouten en wijzigingen voorbehouden.
Need help?
Do you have a question about the W 890 FLEXIO and is the answer not in the manual?
Questions and answers