Related Manuals for WAGNER W 867 E
Summary of Contents for WAGNER W 867 E
- Page 1 2 Jahre Garantie 2 years Guarantee 2 ans de garantie W 867 E 2 jaar D/GB/F/NL garantie...
- Page 2 W 867 E 24/25...
- Page 3 W 867 E...
- Page 4 W 867 E 20-30 cm...
- Page 5 W 867 E 4 3 2...
- Page 6 W 867 E ................1 - 15 ................16 - 30 ................31 - 45 ................46 - 60 ..........62 ++ ...
-
Page 7: General Safety Instructions
W 867 E Operating instruction Congratulations on purchasing your WAGNER spray guns. You have purchased a proprietary device that requires careful cleaning and care to ensure trouble-free functioning. Read the operating instructions carefully beforeusing the tool and observe the safety instructions. Keep the operating instructions in a safe place. - Page 8 W 867 E Never use the tool in hazardous areas that contain flammable liquids, gases or dusts. Power tools generate sparks that can ignite the dust or vapors. Keep children and other persons away when using the power tool. You can lose control of the tool if you are distracted.
- Page 9 W 867 E This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Page 10 1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter, slots for air intake covered. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. Technical Data Max.
-
Page 11: Field Of Application
W 867 E Technical Data Sound pressure level 80 dB (A) Oscillation level < 2.5 m/s Air hose length 3.5 m Weight approx. 6.3 kg Description (Figs. 1+2) Air cap Union nut Perfect Spray spray attachment Trigger guard Material volume regulation... -
Page 12: Preparation Of The Workplace (For Interior Wall Paint)
W 867 E Coating Materials Not Suitable for Use Materials that contain highly abrasive components, facade paint, caustic solutions and acidic coating substances. Materials with a flash point below 21°C. Preparation of the workplace (for interior wall paint) Cover all surfaces and objects that should not be sprayed, or remove them from the work area. - Page 13 W 867 E Thinning recommendation Sprayed material Interior wall paint (dispersions and latex paint) dilute by 10 % If the feed rate is too low even at maximum flow setting, dilute in steps of 5 - 10 % until the feed rate meets your requirements.
-
Page 14: Selecting The Spray Setting
W 867 E Three different spray jet settings can be chosen on the spray gun, depending on the application and target object. Selecting the Spray Setting Fig. 8 A = horizontal flat jet for horizontal surfaces Fig. 8 B = vertical flat jet for vertical surfaces ... -
Page 15: Interruption Of Work Till 4 Hours
W 867 E Fig. 10 A: CORRECT: Even distance to the object. Fig. 10 C: INCORRECT: Uneven distance causes uneven coating. • Move the spray gun evenly cross-wise or up-and-down, depending on the spray pattern setting. • An even movement of the spray gun results in an even surface quality. -
Page 16: Maintenance
W 867 E Turn the gun front part and gun rear part against each other. ATTENTION: Never hold the gun handle under water or immerse it into liquids. Clean the housing only with a moistened cloth. Unscrew the container. Empty any remaining coating material back into the material tin. - Page 17 W 867 E In order to mount the gun more easily apply lubricating grease (enclosed) liberally to the O-ring at the spray attachment (Fig. 11, item 18) and to the O-ring of the plug connection of the air hose (Fig. 11, item 19).
-
Page 18: Environmental Protection
For processing interior wall paint 2301 734 We recommend against using the WallPerfect spray attachment with the W550/W560/W610. Further information about the WAGNER range of products for renovating is available under www.wagner-group.com Environmental protection The appliance and accessories should be recycled in an environmentally friendly way. -
Page 19: Correction Of Malfunctions
W 867 E Correction of Malfunctions Malfunction Cause Remedy • No coating Nozzle clogged Clean ➞ • material emerges Material volume setting turned too Turn to the right (+) ➞ from the nozzle far to the left (-) • No pressure build-up in container Tighten container ➞... - Page 20 W 867 E Malfunction Cause Remedy • Device does not Device overheated Unplug the power ➞ function plug, let the device cool down approx. 30 minutes, do not bend the hose, check the air filter, do not cover the intake slots •...
- Page 21 Wearing parts are also excluded from the guarantee. The guarantee excludes commercial use. We expressly reserve the right to fulfil the guarantee. The guarantee expires if the tool is opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to faulty maintenance work are not covered by the guarantee.
-
Page 22: Ce Declaration Of Conformity
W 867 E CE Konformitätserklärung Wir erklären in alleiniger Verantwortung, dass dieses Produkt den folgenden einschlägigen Bestimmungen entspricht: 73/23/EWG, 89/336 EWG; 2002/95/EG; 2002/96/EG Angewandte harmonisierte Normen: EN 55014-1: 2002, EN 55014-2: 2001, EN 61000-3-2/2005, EN 61000-3-3:2001, EN 60335-1:2004 CE Declaration of Conformity... - Page 23 301 62 Plzen Hotline 0180/1000 227 +49/75 44/505-169 +420 376 709 205 +420 376 709 263 J. Wagner Spraytech Ibérica S.A. Wagner Spraytech Belgie Ctra. N-340, Km 1245,4 Veilinglaan 58 08750 Molins de Rei (Barcelona) 1861 Meise-Wolvertem ...
Need help?
Do you have a question about the W 867 E and is the answer not in the manual?
Questions and answers