Table of Contents
Advertisement
4.
Expand Remote Systems in the configuration tree and locate your system.
Tip
number, such as NI-CRIO-9149-1856AAA.
Configuring Startup Options
Complete the following steps to configure the NI 9149 startup options in MAX.
1.
In MAX, expand your system under Remote Systems.
2.
Select the Startup Settings tab to configure the startup settings.
NI 9149 Startup Options
You can configure the following NI 9149 startup options.
Startup Option
Force Safe
Mode
Disable FPGA
Startup App
Enable Secure
Shell (SSH)
Logins
NI 9149 Features
The NI 9149 provides the following features.
Ports and Connectors
The NI 9149 provides the following ports and connectors.
MAX lists the system under the model number followed by the serial
Table 1. NI 9149 Startup Options
Rebooting the NI 9149 with this setting on starts the NI 9149 without
launching LabVIEW Real-Time or any startup applications. In safe mode,
the NI 9149 launches only the services necessary for updating
configuration and installing software.
Rebooting the NI 9149 with this setting on prevents autoloading of any
FPGA application.
Note
When you reset the cRIO-906x controller either
programmatically or by using the RESET button, you also reset
the FPGA. All FPGA I/O lines are tri-stated after a reset, and
will enter predefined states once loaded.
Rebooting the NI 9149 with this setting on starts sshd on the NI 9149.
Starting sshd enables logins over SSH, an encrypted communication
protocol.
Note
Visit
more information about SSH.
Description
ni.com/info
and enter the Info Code
NI 9149 User Manual | © National Instruments | 3
for
openssh
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the NI 9149 and is the answer not in the manual?