Brake Fluid - Hyster H40-60XT Operating Manual

Maintenance

Brake Fluid

WARNING
Small amounts of water in the brake system can cause
reduced braking performance if the water reaches the
wheel cylinder areas. DO NOT allow water entry.
Ensure that the sealed reservoir lid is properly
replaced.
134
Replace the brake fluid in the system if there is dirt or
water in the system.
On lift trucks with dry brakes, only use SAE J-1703
(DOT 3) brake fluid in the master cylinder.
Open cover to brake fluid reservoir. Open reservoir and
check fluid lever. If fluid is low, fill to within 2.5 mm (0.1 in.)
of max line on reservoir. See Figure 30.