Return Video Feed - TVU networks One TM1000 v2 Set Up And Operating Manual

A
D
Label Record Mode: Controls and Functions Description
R: Displays receiver name. To view a different available receiver, click the drop down
A
menu to scroll through the options.
Solo: When checked, the particular TVU Transmitter will only be shown as "online" on
B
the receiver selected from the drop down menu.
C Bitrate/Delay: Enter the desired transmission Bitrate and delay(s).
Live/Stop Live: Starts and stops the live transmission.
D
Apply: Applies changes made to bitrate, latency, or mode.
E
Displays current TVU Receiver ID, TVU Transmitter ID, Line Quality, Error Rate and Au-
F
to Set.
Mode: Select an optimized preset bit-rate and latency based on broadcast setting(s)
G
by choosing a different mode.
Table 10

Return Video Feed

This is a feature that can only be used on a TX3200, TX3000 or GX3200 series Transceiv-
er. It will allow the camera operator in the field to have the ability to watch a return vid-
eo feed from the studio of their TVU Transmitter transmission or from an SDI input on
the Transceiver. The return video feed can be sent from the Receiver to the Transmitter
when in Live, Online or Standby modes. View the return video feed via the TVU Trans-
mitter Hotspot using any Wi-Fi enabled iOS device with a standard Safari web browser.
See Configuring the TVU One for Hotspot (pg. 41) for details on how to connect to a
Hotspot.
TVU One TM1000 v2 in V6.0 Set Up and Operating Guide
Figure 26 R Status screen
B
C
E
F
G
Page 28 of 49