Listen To Fm Radio - Philips DCB293/79 User Manual

4
Press / to switch to [Tuner Reset].
5
Press ENTER to confirm.
6
Press / to switch between [Y] and
[N].
• [Y]: reset all DAB/FM radio stations.
• [N]: preset radio stations remain
unchanged.
7
Press ENTER to confirm.

Listen to FM radio

Tune to a radio station
1
Press TUNER to select FM.
2
Press / to tune to a specific
frequency.
»
Play starts automatically.
Tip
•
You can press MODE/SCAN to tune to
the next station with strong reception
automatically.
Program radio stations automatically
You can program a maximum of 30 preset
radio stations (FM).
1
In the tuner mode, press and hold
MODE/SCAN to activate automatic
program mode.
»
All available stations are programmed
in the order of waveband reception
strength.
»
The first programmed radio station is
broadcast automatically.
Program radio stations manually
You can program a maximum of 30 preset
radio stations (FM).
1
Tune to a radio station.
2
Press PROG/CLOCK SET to activate
program mode.
3
Press / to allocate a number to
this radio station, then press and hold
PROG/CLOCK SET to confirm.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store
another station in its place.
Select a preset radio station
1
In tuner mode, press / to select a
preset number.
2
Press /ENTER to confirm.
• You can also press the numeric buttons
to select a preset number directly.
• You can press
between mono and stereo signals.
Tip
• Position the antenna as far as possible from
TV, VCR or other radiation source.
•
For optimal reception, fully extend and adjust
the position of the antenna.
/ENTER to switch
EN 17