Preparing the Machine
1. Park the machine on a level surface.
2. Move the motion-control levers to the N
3. Engage the parking brake.
4. Shut off the engine and remove the key.
Assembling the Kit
1. Assemble the rear mount assembly
Note: Mount the large fist-clamp bracket in 1 of the
3 holes to allow clearance between the trimmer engine
and the machine when the trimmer is mounted.
1. Rear bracket
2. Nut (1/4 inch)
3. Large backer plate
4. Large fist clamp
EUTRAL
(Figure
2).
Figure 2
5. Large fist-clamp bracket
6. Bolt (1/4 x 5/8 inch)
7. Bolt (1/4 x 1-1/2 inches)
-L
position.
OCK
Figure 1
2. Assemble the front mount assembly as shown in
3
or
Figure
g038078
2
4.
g037289
g037289
Figure