Configuring Shdsl - Siemens SCALANCE M-800 Series Getting Started

1.3.3.9

Configuring SHDSL

Procedure
1. Click "Interfaces" > "SHDSL" in the navigation panel
2. Specify the role of the interfaces
3. For "Link Data Rate" select auto" and for "Target SNR Ration" select "reliability".
4. Click "Set Values".
5. Deselect "Enable Layer2 Bridge Mode" to set the routing mode. In this mode, the security
functions (IPsec VPN, firewall, NAT/NAPT) are available again.
SCALANCE M-800 Getting Started
Getting Started, 06/2015, C79000-G8976-C337-04
SHDSL 1 Central Office (CO)
(X1)
SHDSL 2 Customer Premises Equipment (CPE)
(X2)
Connecting SCALANCE M-800 to WAN
1.3 Connecting M826 with SHDSL
75