Chapter 7
IP Address Assignment
NOTE
Options set at the host level override options set at the DHCP server level.
1.
Make sure the CLI is in Configuration mode.
2.
Navigate to:
• For IPv4
services » dhcpserver » hosts » {host} » options
• For IPv6
services » dhcpserver6 » hosts » {host} » options
Where {host} is the name of the host.
3.
Configure the hardware settings by configuring the following parameter(s):
Parameter
type { type }
mac { mac }
4.
Configure the leased time settings by configuring the following parameter(s):
Parameter
default { default }
maximum { maximum }
5.
Configure the client settings by configuring the following parameter(s):
• For IPv4
fixed-ip { fixed-ip }
unknown-client { unknown-client }
shared-network { shared-network }
subnet { subnet }
host-groups { host-groups }
244
Synopsis: { fddi, token-ring, ethernet }
Default: ethernet
The type of network hardware used by the client, associated with the host entry.
Synopsis: A string 17 characters long
The physical network address of the client. Note that this corresponds to the hardware
type; for example, the MAC address for the ethernet.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
Default: 600
The minimum leased time in seconds that the server offers to the clients.
Synopsis: A 32-bit unsigned integer
Default: 7200
The maximum leased time in seconds that the server offers to the clients.
Parameter
Synopsis: A string 7 to 15 characters long
The IP address that the server assigns to the matching client.
This parameter is mandatory.
Synopsis: { allow, deny, ignore }
The action to take for previously unregistered clients
Synopsis: A string
The shared-network that this host belongs to.
Synopsis: A string
The subnet that this host belongs to.
Synopsis: A string
Description
Description
Description
Configuring Host Options
RUGGEDCOM ROX II
CLI User Guide