►RF SPECIFICATIONS ........4 ►TROUBLESHOOTING ........ 14 ►CONNECTIΟΝ & OPERATION ....5 ►INSTALLATION EXAMPLE ......15 ►PACKAGE INCLUDES ........6 ►MAIN MENU ..........8 - 9 The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support...
►INTRODUCTION Digital quad-channel FULL HIGH DEFINITION modulator. HDMI signal input from up to four (4) HDMI sources (Terrestrial & Satellite TV receivers, Cameras, DVD’s, DVR’s, Digital Signage etc) can be converted to two (2) channels FULL HIGH DEFINITION 1080p, Digital Terrestrial DVB-T or ISDB-T MPEG4 signal output, in VHF/UHF band.
►TECHNICAL SPECIFICATIONS Processor 4 x 200MHZ 32Bits RISC Memory 4 x DDRII 16bit 512Mbits (Embedded) & NOR Flash 32Mbit HDMI Input 4 x HDMI v1.4a USB Type 4 x USB 2.0 HOST, Supports Fat32 Power Consumption 20W maximum, 100-240V AC to DC power supply unit 12V 3A Video Encoder MPEG1, MPEG2 MP@HL, MPEG4 SP@L3 to ASP@L5, MPEG4 AVC HP@level4.1, MP@level4.1...
►CONNECTIΟΝ & OPERATION 1. Connect up to 4 HDMI Cables from up to 4 HDMI source devices to the respective HDMI Modulator HD inputs (HD IN 1, 2, 3, 4). 2. Connect an RF Cable from RF OUT to the RF Network. 3.
►PACKAGE INCLUDES 1. HDMI Modulator lite Quad 2. Power Adapter 3. Mounting screws 4. User Manual KEY LOCK Press the key lock and when the green led lights up the keypad is locked. Press once again to unlock. LOCK MENU...
►MAIN MENU Press Menu/OK to enter the MENU. Navigate through the MENU by using the buttons “Left” / “Right” in each modulator display separately (MOD1, MOD2, MOD3, MOD4) MOD1 & MOD2 in pair, produce one COFDM DVB-T or ISDB-T MUX which includes 2 TV channels.
Page 9
CH: Shows the current RF FACT: Factory defaults. channel output. Use the keys Up Press key UP to restore factory & Down to select the desired RF defaults. channel output. CFG: Configuration file extraction. ID: Shows the current ID. Use Press key UP to extract the the keys Up &...
►CONFIGURATION EXTRACTION (CFG) For an advanced configuration of the HDMI modulator QUAD, you must extract the con- figuration file one by one for each MODULATOR (MOD1, MOD2, MOD3, MOD4) sepa- rately, to a USB drive, modify it and import it again in the respective HDMI modulator. To extract the configuration file named jedi_config.txt*, you must connect a USB drive** to the USB slot, enter the Main Menu, select CFG and press key UP to extract the file to the USB drive.
7MHZ = from 0 to 9000 (per Modulator, total 2 x 9000) 8MHZ = from 0 to 10000 (per Modulator, total 2 x 10000) Network Name, Max 12 characters <Netname>EDISION<\Netname> <TV _ Standard>0<\TV _ Standard> TV Standard: 0 DVB-T, 1 ISDB-T ►CONFIGURATION IMPORT (CFG) To import the configuration file jedi_config.txt, to each MODULATOR (MOD1, MOD2,...
[ID] to be able for the end user devices to receive the channel. The HDMI Modulator lite QUAD is pre-configured with the following IDs. HDMI 1 / mod 1 = ID-01 / TV-1...
• Make sure your Fast Pre-Config ID does not conflict with another unit The sound is not synchronized with the video • Please adjust the PCR gap each time until you get the perfect A/V sync For more queries or advanced troubleshooting, please contact our technical support at support@edision.gr...
2 WAY RF SPLITTER HD IN 1 HD IN 2 HD IN 1 HD IN 2 LOCK MENU LOCK MENU LOCK MENU LOCK MENU LOCK MENU LOCK MENU LOCK MENU LOCK MENU HD IN 3 HD IN 4 HD IN 3 HD IN 4...
Page 16
. e d i s i o n . g r EDISION HELLAS LTD • FARMAKEIKA - 57001 N. RYSIO • THESSALONIKI - GREECE...
Need help?
Do you have a question about the HDMI Modulator Lite Quad and is the answer not in the manual?
Questions and answers