Puffco Peak Instruction Manual
Hide thumbs
Also See for Peak:
- User manual ,
- Instruction manual (72 pages) ,
- Instruction manual (9 pages)
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Puffco Peak
Summary of Contents for Puffco Peak
- Page 1 P E A K I N S T R U C T I O N M A N U A L...
- Page 2 SHARE THE VIEW: Use #PuffcoPeak to share your experience. We’ll share your photos and videos with our global audience (seriously we will). Puffco...
-
Page 3: Table Of Contents
Also, you’ll learn some secret tips and tricks along the way. = Tips to get the most out of your Peak Whats inside / p 3 Quick start / p 4 - 8... -
Page 4: Whats Inside / P
WHAT’S INSIDE: A: Tether F: Glass attachment* B: The Peak Dab Tool G: Carb Cap* C: Cotton swabs (4) H: Ceramic Bowl I: Atomizer** D: USB cable J: Base E: AC adapter *Each glass piece is hand blown, and may vary slightly in size. -
Page 5: Quick Start / P
QUICK START: STEP 1: Fully charge device before first use. Device pulses white while charging, and turns off automatically when complete. STEP 2: Fill glass with water just above the air-holes. Do not fill glass while attached to base. = Water will damage base and atomizer! = Do not overfill glass. - Page 6 STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully push the front of glass into the base, then the back. STEP 4: To power the device on/off, hold down the button for 3 seconds. = Power down when finished to conserve battery life.
- Page 7 STEP 5: Single click to toggle through heat settings. BLUE (Low) - GREEN (Medium) (High) - WHITE (Peak) STEP 6: Use The Peak Dab Tool to place con- tents on the bottom surface of the bowl (not = Do not overfill. Overfilling can the side). damage your atomizer.
- Page 8 STEP 7: Place carb cap on top of atomizer. = Protect your carb cap by using the tether provided. STEP 8: Double click to initiate heat-up. Press and hold button anytime to exit. Pulsing light indicates *See p. 11 for sesh mode. heat-up mode is active.
- Page 9 STEP 9: Device will vibrate and lights will flash 3 times when ready. = Inhaling gently will produce the best results. STEP 10: Use a cotton swab to clean the bowl after each use.
-
Page 10: Temperature Settings / P
Average heat-up time is around 20 seconds. The Peak device features intelligent temperature calibration, which provides a more consistent experience during repeated use. This means that all heat up times may vary. -
Page 11: Cleaning Your Device / P
CLEANING: Preparation: Remove glass before unscrewing and re-inserting atomizer (do not overtighten, don’t force it). 1. Clean carb cap and glass by soaking in isopropyl alcohol. Rinse clean with water after. 2. Clean gold threads and connector in the base with a cotton swab. -
Page 12: Tips And Tricks / P
TIPS AND TRICKS: Sesh Mode: Haven’t reached your peak? We’ve got you covered. We created a sesh mode that increases heat and extends your session by 15 seconds. Use it to boost heat, or to share with your friends. If vapor production is low, double click to initiate sesh mode. -
Page 13: Peak Protection / P
Should you encounter an issue, first, visit Puffco.com to view FAQ’s (most answers can be found there). If not, you can livechat with a specialist at Puffco. com or contact our customer care team by emailing Support@Puffco.com... -
Page 14: Legal / P
Know that Puffco reserves the right to verify the age of the consumer prior to every purchase. Registered Puffco products are not intended for any use which is illegal under any state or federal law. - Page 15 SHARE THE VIEW: Use #PuffcoPeak to share your experience. Kindly follow us on instagram! Puffco...
- Page 16 770-00003 by Puffco Creation Labs - Subject to alterations · All rights reserved...
Need help?
Do you have a question about the Peak and is the answer not in the manual?
Questions and answers